Transportation And Storage; Disposal; Warranty; Ec Declaration Of Conformity - PrimAster PMAB 20 Turbo Original Instructions Manual

GB ENGLISH

TRANSPORTATION AND STORAGE

Protect the device against impacts or strong vibrations.
Secure the device if it is to be transported in a vehicle.
Use the original packaging for transportation if possible.
The appliance must be stored in a dry place and protected
from frost.

DISPOSAL

If your device should become useless some-
where in the future or you do not need it any
longer, do not dispose of the device together
with your domestic refuse, but dispose of it in
an environmentally friendly manner.
Please dispose of the device itself at an according collec-
ting/recycling point. By doing so, plastic and metal parts
can be separated and recycled. Information concerning
the disposal of materials and devices are available from
your local administration.
Batteries do not belong in household waste. As a con-
sumer, you are legally obliged to return used batteries.
Batteries must be removed and disposed of in the proper
manner at the end of your device's service life. You can
dispose of old batteries at communal collection points or
at your dealer/sales outlet.

WARRANTY

For this tool, the company provides the end user - inde-
pendently from the retailer's obligations resulting from
the purchasing contract - with the following warranties:
The warranty period is 84 months beginning from the
hand-over of the device which has to be proved by the
original purchasing document. Wearing parts, rechargea-
ble batteries and defects caused by the use of non fi tting
accessories, repair with parts that are not original parts
of the manufacturer, use of force, strokes and breaking as
well as mischievous overloading of the motor are exclu-

EC DECLARATION OF CONFORMITY

We, ikra GmbH, Schlesierstrasse 36, D-64839 Münster,
GERMANY, declare under our sole responsibility that
the Battery leaf blower PMAB 20 Turbo, to which
this declaration relates correspond to the relevant basic
safety and health requirements of Directives
2006/42/EC (EC Machinery directive)
2014/30/EU (EMC directive)
2000/14/EC+ 2005/88/EG (noise directive)
2011/65/EU (RoHS directive)
For the relevant implementation of the safety and health
requirements mentioned in the Directives, the following
standards and/or technical specifcation(s) have been
respected:
EN 60335-1:2012+A11:2014+A13:2017+A1:2019
+A2:2019+A14:2019;
EN 50636-2-100:2014;
EN 55014-1:2017;
EN 55014-2:2015;
EN 50581:2012;
26
The device should be cleaned before it is put into storage.
Store the device and its accessories in a dark, dry and frost
free place, which cannot be accessed by children. The
optimum storage temperature is between 5 and 30°.
Electrical devices may not be disposed of in the
household waste.
Any damaged or disposed electric or electronic devices
must be delivered to appropriate collection centres.
Transport packaging disposal
The packaging protects the machine against damage
during transport. Packaging materials are usually chosen
based on environment aspects and waste treatment
principles and are therefore recyclable. Returning the
packaging into material circulation saves raw materials
and reduces waste production. Parts of packagings (e.g.
foils, styropor®) can be dangerous for children.
Keep parts of the packagings out of reach of children and
dispose them as soon as possible.
ded from this warranty. Warranty replacement does only
include defective parts, not complete devices. Warranty
repair shall exclusively be carried out by authorized service
partners or by the company's customer service. In the
case of any intervention of not authorized personnel, the
warranty will be held void. The warranty shall not apply to
commercial use of the product.
All postage or delivery costs as well as any other subse-
quent expenses will be borne by the customer.
Conformity assessment procedure according
2000/14/EC amended by 2005/88/EC to Annex V.
Measured sound power level
Leaf blower: 94 dB (A), K=3 dB (A)
Guaranteed sound power level 97 dB (A)
The year of manufacture is printed on the nameplate and
can be additionally retrieved via the consecutive serial
number.
Münster, 2021-04-12
Matthias Fiedler
Senior Product Manager
Ikra GmbH
Maintenance of technical documentation:
Matthias Fiedler, Ikra GmbH, Schlesierstrasse 36,
64839 Münster, Germany