Homelite HPW2201 Operator's Manual page 4

ALWAYS REFUEL OUTDOORS. Never refuel

indoors or in a poorly ventilated area.
NEVER STORE THE MACHINE WITH FUEL IN

THE FUEL TANK INSIDE A BUILDING where
ignition sources are present, such as hot water and
space heaters, clothes dryers, and the like.
IF THE FUEL TANK HAS TO BE DRAINED, DO

THIS OUTDOORS.
TO REDUCE THE RISK OF FIRE AND BURN

INJURY, handle fuel with care. It is highly flammable.
DO NOT SMOKE WHILE HANDLING FUEL.

ADD FUEL BEFORE STARTING THE ENGINE.

Never remove the cap of the fuel tank or add fuel
while the engine is running or when the engine is
hot.
LOOSEN FUEL CAP SLOWLY to release pressure

and to keep fuel from escaping around the cap.
REPLACE ALL FUEL TANK AND CONTAINER

CAPS SECURELY.
WIPE SPILED FUEL FROM THE UNIT. Move 9m

away from refueling site before starting engine.
 IF FUEL IS SPILED, do not attempt to start the
engine but move the machine away from the area
of spillage and avoid creating any source of ignition
until fuel vapours have dissipated.
NEVER ATTEMPT TO BURN OFF SPILLED FUEL

UNDER ANY CIRCUMSTANCES.
BEFORE STORING, ALLOW THE ENGINE TO

COOL.
ENGLISH
STORE FUEL IN A COOL, WELL-VENTILATED

AREA, safely away from spark and/or flame-
producing equipment.
STORE FUEL IN CONTAINERS specifically

designed for this purpose.
EMPTY FUEL TANK AND RESTRAIN THE UNIT

FROM MOVING before transporting in a vehicle.
WHEN SERVICING USE ONLY IDENTICAL

HOMELITE REPLACEMENT PARTS.
Use of any other parts may create a hazard or cause
product damage.
USE COLD WATER ONLY.

MAKE SURE MINIMUM CLEARANCE of 1m is

maintained from combustible materials.
SAVE THESE INSTRUCTIONS. Refer to them

frequently and use them to instruct other users.
If you loan someone this tool, loan them these
instructions also.
The safety valve opens when the permissible operating
pressure is exceeded; water flows back to the suction side
of the pump. The safety valve is set by the manufacturer
and sealed. Contact customer service when you want your
safety valve set.
The thermo-valve opens when the permissible water
temperature is exceeded and prevents the pump from
overheating.
3