Table of Contents
Advertisement
board. None of the three controller screens function if the zone is bypassed.
Control Slider 1 is used to select among the SL-2001 local controllers:
Wheel A, B
Sstain
The Sustain switch input
ChPrsr
Channel pressure (aftertouch)
csll-csl4
The four front panel control sliders
cvl-cv2
sw A, B, C
The three programmable switch inputs
sw *,a
Front panel Star and Alpha switches
Note*
The MIDI note number (0-127) of the last
Vel
The velocity value (0-127) of the last
Any control message from any source can be either passed directly to the SL-2001 MIDI outputs, converted to any other con-
troller, or blocked completely. Messages may also be scaled to adjust the depth of the control effect using Control Slider 2.
Use Control Slider 3 to select the destination message. If desired, any destination controller may be initialized when the pre-
set is entered. Use Control Slider 4 to set the initial value to be issued. The initial value can be sent to any destination, even
if the depth setting is off.
Blank SL-2001 presets will always leave Wheel A and Wheel B programmed as Pitch and Modulation, respectively. The Sstain
and Key Pressure controls also default to their respective messages.
The left control and right control wheels
The two voltage inputs
key played on SL-2001 keyboard
key played on the SL-2001 keyboard
Advertisement
Table of Contents
