Table of Contents
Advertisement
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -6. Spring section (cont.)
ASSEMBLING
(1) Take the reverse steps of the disassembling procedure for Spring section.
(2) Fix Spur gear 55 complete with Flat washer 4 and Bind PT3x16 Tapping screw.
Install Spring section in Housing L while adjusting Roller position of Spur gear 55 complete
to under the hook portion of hammer (Fig. 24).
(3) Fix Spring section with Bind PT3x16 Tapping screw and mount driver guide, driver, and driver guide cover
to Housing R. (Fig. 25)
Fig. 24
Bind PT3x16 Tapping screw
Spring section
Flat washer 4
Roller portion of
Spur gear 55
Hook portion of
Hammer
Fig. 25
Hook portion
of Hammer
Roller
(The position
is lower than
that of the hook
portion of hammer)
P 7/ 15
Spring section
Bind PT3x16
Tapping screw
Advertisement
Table of Contents
