SCHUNK MMS 22-PI2 Assembly And Operating Manual
Magnetic switch
Hide thumbs
Also See for MMS 22-PI2:
- Assembly and operating manual (2 pages) ,
- Commissioning instructions (2 pages)
Related Manuals for SCHUNK MMS 22-PI2
Summary of Contents for SCHUNK MMS 22-PI2
- Page 1 Assembly and Operating Manual MMS 22-PI2 / MMSK 22-PI2 Magnetic switch Translation of Original Operating Manual...
- Page 2 Your SCHUNK team Customer Management Tel. +49-7133-103-2503 Fax +49-7133-103-2189 cmg@de.schunk.com Please read the operating manual in full and keep it close to the product. 01.00 | MMS 22-PI2 / MMSK 22-PI2 | Assembly and Operating Manual | en | 1566687...
-
Page 3: About This Manual
MMS 22-PI2 / MMSK 22-PI2 MMS 22-PI2 / MMSK 22-PI2 -SA, with lateral cable outlet MMS 22-PI2 / MMSK 22-PI2 -HD, with stainless steel housing 01.00 | MMS 22-PI2 / MMSK 22-PI2 | Assembly and Operating Manual | en | 1566687... -
Page 4: Warranty
The scope of delivery includes Magnetic switch MMS 22-PI2 / MMSK 22-PI2 in the version ordered Assembly and Operating Manual Accessory pack (incl. magnetic teaching tool, ID 301030) 01.00 | MMS 22-PI2 / MMSK 22-PI2 | Assembly and Operating Manual | en | 1566687... -
Page 5: Inappropriate Use
Structural changes should only be made with the written approval of SCHUNK. 01.00 | MMS 22-PI2 / MMSK 22-PI2 | Assembly and Operating Manual | en | 1566687... -
Page 6: Personnel Qualification
Before working with the product, the personnel must have read and understood the complete assembly and operating manual. Observe the national safety regulations and rules and general safety instructions. 01.00 | MMS 22-PI2 / MMSK 22-PI2 | Assembly and Operating Manual | en | 1566687... -
Page 7: Technical Data
Max. + 80 Nominal voltage [VDC] Min. Max. IP rating More technical data is included in the catalog data sheet. Whichever is the latest version. 01.00 | MMS 22-PI2 / MMSK 22-PI2 | Assembly and Operating Manual | en | 1566687... -
Page 8: Assembly And Settings
The sensor is an electronic component that can be sensitive to high-frequency interference or electromagnetic fields. Check whether there is sufficient distance between the sensor and sources of interference and their supply cables. 01.00 | MMS 22-PI2 / MMSK 22-PI2 | Assembly and Operating Manual | en | 1566687... -
Page 9: Electrical Connection
Secure the sensor (1) using the set-screw. ð Observe the maximum tightening torque of 10 Ncm. Connect the sensor (1) and fasten the cable. 01.00 | MMS 22-PI2 / MMSK 22-PI2 | Assembly and Operating Manual | en | 1566687... -
Page 10: Adjusting The Sensor
LED (2) flashes at 2 s intervals if the magnetic field is too large or too small. If there is a duplicate or unsuitable switching point, the sensor (4) should be moved by 2 mm and taught again. 01.00 | MMS 22-PI2 / MMSK 22-PI2 | Assembly and Operating Manual | en | 1566687... - Page 11 In this case, the switch-off point closer to the switch-on point must be taught. 01.00 | MMS 22-PI2 / MMSK 22-PI2 | Assembly and Operating Manual | en | 1566687...
-
Page 12: Troubleshooting
10 mm. NOTE If these steps do not eliminate the problem, contact SCHUNK Service for troubleshooting. 01.00 | MMS 22-PI2 / MMSK 22-PI2 | Assembly and Operating Manual | en | 1566687... -
Page 13: Translation Of The Original Declaration Of Conformity
Proximity switches (IEC 60947-5-2:2007 + A1:2012) Signed for and on behalf of: SCHUNK SE & Co. KG Lauffen/Neckar, September 2023 i.V. Nico Peper;Director Software and Electronics;Technology & Innovation 01.00 | MMS 22-PI2 / MMSK 22-PI2 | Assembly and Operating Manual | en | 1566687... - Page 14 Marcel Machado, address: refer to manufacturer's address Signed for and on behalf of: SCHUNK SE & Co. KG Lauffen/Neckar, September 2023 i.V. Nico Peper; Director Software and Electronics; Technology & Innovation 01.00 | MMS 22-PI2 / MMSK 22-PI2 | Assembly and Operating Manual | en | 1566687...
- Page 15 "on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS)", or fulfill their intended function only as part of one. Therefore products from SCHUNK do not fall within the scope of the directive at this time. REACH Regulation Products from SCHUNK fully comply with the regulations of Regulation (EC) No. 1907/2006...
- Page 16 SCHUNK SE & Co. KG Toolholding and Workholding | Gripping Technology | Automation Technology Bahnhofstr. 106 - 134 D-74348 Lauffen/Neckar Tel. +49-7133-103-0 Fax +49-7133-103-2399 info@de.schunk.com schunk.com Folgen Sie uns I Follow us Wir drucken nachhaltig I We print sustainable...
Need help?
Do you have a question about the MMS 22-PI2 and is the answer not in the manual?
Questions and answers