Table of Contents
Advertisement
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual
Before You Start
Please check the video coding type. ROI is supported when the video coding type is H.264 or H.
265.
Steps
1. Go to Configuration → Video/Audio → ROI .
2. Check Enable.
3. Select the channel No. according to your need.
4. Select Stream Type.
5. Select Region No. in Fixed Region to draw ROI region.
1) Click Draw Area.
2) Click and drag the mouse on the view screen to draw the fixed region.
3) Click Stop Drawing.
Note
Select the fixed region that needs to be adjusted and drag the mouse to adjust its position.
6. Input the Region Name and ROI Level.
7. Click Save.
Note
The higher the ROI level is, the clearer the image of the detected region is.
8. Optional: Select other region No. and repeat the above steps if you need to draw multiple fixed
regions.
12.4 Metadata
Metadata is the raw data that the device collects before algorithm processing. It is often used for
the third party integration.
Go to Configuration → Video/Audio → Metadata Settings to enable metadata uploading of the
desired function for the camera channels.
12.5 Display Settings
It offers the parameter settings to adjust image features.
Go to Configuration → Image → Display Settings .
For device that supports multiple channels, display settings of each channel is required. The
settings for different channels may be different. This part introduces all possible parameters among
the channels.
Click Default to restore settings.
74
Advertisement
Table of Contents
