Table of Contents
Advertisement
Troubleshooting
Code
OC
LC, LC1
Ub
3C
UC
HC
58 English
WW95N64FRPW_DC68-03963R_EN.indd 58
Water is overflowed.
•
Restart after spinning.
•
If the information code remains on the display, contact a local
Samsung service centre.
Check the drain hose.
•
Make sure the end of the drain hose is placed on the floor.
•
Make sure the drain hose is not clogged.
•
If the information code remains, contact a customer service
centre.
NOTE
When the washer displays the "LC,LC1" code, the washer do
draining for 3 minutes. During this time, the Power button is
inoperative.
Spinning does not work.
•
Make sure laundry is spread out evenly.
•
Make sure the washing machine is on a flat, stable surface.
•
Redistribute the load. If only one item of clothing needs
washing, such as a bathrobe or pair of jeans, the final spin
result might be unsatisfactory, and an "Ub" check message will
be shown in the display.
Check the motor for operation.
•
Try restarting the cycle.
•
If the information code remains, contact a customer service
centre.
The electronic control needs to be checked (Over Voltage Error).
•
Check the PCB and wire harness.
•
Check if power is supplied properly.
•
If the information code remains, contact a customer service
centre.
Low voltage detected
•
Check if the power cord is plugged in.
If the information code remains, contact a customer service
•
centre.
High temperature heating check
•
If the information code remains, contact a customer service
centre.
Action
2018/11/9 15:12:25
Advertisement
Table of Contents
