Table of Contents
Advertisement
Options
Option
Sound On/Off
Pre Wash
Intensive
Delay End
You can set the washing machine to finish your wash automatically at a later time, choosing
a delay of between 1(60minutes) to 24 hours (in 1 hour increments). The hour displayed
indicates the time the wash will finish.
1. Select a cycle. Then change the cycle settings if necessary.
2. Press Delay End (or the +/- button) repeatedly until a desired end time is set.
3. Press and hold Start/Pause (Hold to Start). The Delay End indicator blinks and the washing
machine tumbles the drum to sense the weight of the load if load sensing is preset for the
selected cycle. When complete, it displays your set time with the timer running.
4. To cancel the Delay End, restart the washing machine by pressing Power.
Real-life case
If you are going out at 5pm want to make sure the 2 hour wash cycle is completed by this
time, select the Delay End option. Simply select the 3 hour setting and press Start/Pause
(Hold to Start) at 2:00 pm. The washing machine will then start operating at 3:00 pm and will
end at 5:00 pm. Please see below for the diagram which explains the timings of this example.
2:00 pm
Set the Delay End to 3 hours
Load sensor
The load sensor icon lights up when you select a cycle that supports load sensing. Some
cycles may not support loading sensing. Once you start the cycle, the icon blinks or stays
solid during the load sensing process, and turns off when the process is complete.
WW95N64FRPW_DC68-03963R_EN.indd 37
• You can turn on or off the sound from the washing machine.
When this function is set to Off, the AddWash alarm, the
melody of cycle completion, and the power-off beep will not
sound. However, the other sounds stay active.
• This will add a preliminary washing cycle before the main
wash cycle.
• For badly soiled laundry. The operation time for each cycle is
longer than normal.
3:00 pm
Start
Description
5:00 pm
End
English 37
2018/11/9 15:12:16
Advertisement
Table of Contents
