Crisping Bread Rolls; Crumb Tray - Silvercrest 339180 1910 Operating Instructions Manual

4) When the defrosting and toasting process is finished, the toaster switches itself
off automatically, the control lamp integrated in the button "Defrosting"
goes out and the bread slices are ejected to the top.
NOTE
► Press the "Defrost" button
The integrated control lamp goes out and the defrost process switches to
a normal toasting process.

Crisping bread rolls

Never lay bread rolls directly onto the toaster, always use the bread roll rack 6.
1) Fold out the two feet of the bread roll rack 6.
2) Place the bread roll rack 6 onto the appliance so that the feet protrude into
the toasting slots 7 and the bar between the toasting slots 7 fits into the
arched sections on the feet. In this position, the bread roll rack 6 sits on the
appliance stably.
3) Place the bread rolls onto the rack and start the toasting procedure. Turn the
toasting dial 2 up to level 1
vary depending on the composition and type of bread roll.
NOTE
► After toasting, the rolls will be very hot.
4) As soon as the toaster switches itself off, turn the rolls over to crisp the other
side and then switch the toaster back on.
5) When you are finished with the bread roll rack 6, you can fold it for
space-saving storage:
–
Wait until the bread roll rack 6 has cooled down.
–
Remove it from the appliance.
–
Fold the feet of the bread roll rack 6 back in.

Crumb tray

When toasting, crumbs that fall from the bread are collected in the crumb tray 0.
1) To empty crumbs from the crumb tray 0, simply pull it out.
2) Tip out the crumbs.
3) Slide the crumb tray 0 back into the toaster so that it palpably engages.
│ GB │ IE │ NI │ CY
■ 10
5 again to switch off the defrost function.
, at most. The actual level of browning can
5
STC 920 C2