StarTech.com ET91000SM40 Specifications

Gigabit single mode media converter (sc - 40km)

Gigabit Single Mode Media Converter (SC - 40km)

StarTech ID: ET91000SM40

Do you need to bridge networks over a high-speed fiber optic backbone? The ET91000SM40 is a

single-mode media converter that allows you to convert 1000Base-LX fiber optic signals into

Gigabit Ethernet at distances up to 40 km (25 miles). Operating at full Gigabit speeds end-to-end, this

media converter is the perfect way to create a high speed network.

Applications and Solutions

> Converts 1000Base-LX fiber optic signals to 1000Base-T Ethernet over single mode cable

> Advanced features: Link-loss forwarding, loop-back test, remote monitor status, two frame

lengths

> Cost-effective way to extend/bridge networks using fiber cabling

> Easy to use and install

> Maximum Fiber Cable length of 40 Km

> Supports full or half-duplex operation

> Color Beige

Table of Contents

Do you have a question about the ET91000SM40 and is the answer not in the manual?

Page 1 Gigabit Single Mode Media Converter (SC - 40km) StarTech ID: ET91000SM40 Do you need to bridge networks over a high-speed fiber optic backbone? The ET91000SM40 is a single-mode media converter that allows you to convert 1000Base-LX fiber optic signals into Gigabit Ethernet at distances up to 40 km (25 miles).
Page 2 > Connector Types 2 - Fiber Optic SC Female > Connector Types 1 - RJ45 Female > Product Height 10.24 in [260 mm] > Input Voltage 115 ~ 230 AC > Product Length 19.29 in [490 mm] > Output Current 1000 mA >...