Menu Items; Sub-Menu Items; Configuration Fields; Pop-Up Window - Asus P5GC-TVM/S Instruction Manual

Table of Contents

Advertisement

2.2.4

Menu items

The highlighted item on the menu bar
displays the specific items for that menu.
For example, selecting Main shows the
Main menu items.
The other items (Advanced, Power, Boot,
and Exit) on the menu bar have their
respective menu items.
2.2.5

Sub-menu items

A solid triangle before each item on any menu screen means that the
iteam has a sub-menu. To display the sub-menu, select the item and press
<Enter>.
2.2.6

Configuration fields

These fields show the values for the menu items. If an item is user-
configurable, you can change the value of the field opposite the item. You
cannot select an item that is not user-configurable.
A configurable field is enclosed in brackets, and is highlighted when
selected. To change the value of a field, select it then press <Enter> to
display a list of options. Refer to "2.2.7 Pop-up window."
2.2.7

Pop-up window

Select a menu item then press <Enter> to display a pop-up window with
the configuration options for that item.
2.2.8

Scroll bar

A scroll bar appears on the right side
of a menu screen when there are items
that do not fit on the screen. Press the
Up/Down arrow keys or <Page Up> /
<Page Down> keys to display the other
items on the screen.
2.2.9

General help

At the top right corner of the menu
screen is a brief description of the
selected item.
ASUS P5GC-TVM/S
System Time
[11:10:19]
Use [ENTER], [TAB]
System Date
[Thu 08/03/2006]
or [SHIFT-TAB] to
Legacy Diskette A
[1.44M, 3.5 in]
select a field.
Use [+] or [-] to
Primary IDE Master
:[ST320413A]
configure system time.
Primary IDE Slave
:[ASUS CD-S340]
Secondary IDE Master
:[Not Detected]
Secondary IDE Slave
:[Not Detected]
Third IDE Master
:[Not Detected]
Fourth IDE Master
:[Not Detected]
IDE Configuration
+-
System Information
Tab
F1
F10
ESC
Main menu items
Advanced Chipset settings
WARNING: Setting wrong values in the sections below
may cause system to malfunction.
Configure DRAM Timing by SPD
[Enabled]
Memory Acceleration Mode
[Auto]
DRAM Idle Timer
[Auto]
DRAm Refresh Rate
[Auto]
Graphic Adapter Priority
[AGP/PCI]
Graphics Aperture Size
[ 64 MB]
Spread Spectrum
[Enabled]
ICH Delayed Transaction
[Enabled]
+-
F1
MPS Revision
[1.4]
F10
ESC
Pop-up window
Scroll bar
Select Screen
Select Item
Change Field
Select Field
General Help
Save and Exit
Exit
Select Screen
Select Item
Change Option
General Help
Save and Exit
Exit
2-11

Advertisement

Table of Contents
loading

Table of Contents