Table of Contents
Advertisement
Important notes
Importantnotes
Notes
In this chapter you will find information regarding safety which it is essential to
take note of when working with your device.
Safety information
Note
Safetyinformation
Please note the information provided in the "Safety/regulations" manual
and in the following safety notes.
When installing and operating the device, please observe the notes on
environmental conditions in Chapter
the instructions in Chapter
When setting up the device, make sure there is clearance all around it so that
the casing receives enough ventilation. In order to avoid overheating, do not
cover the ventilation areas of the monitor or the device.
You must only operate the device if the rated voltage used by the
device is set to the local mains voltage.
The main switch and the ON/OFF switch do not disconnect the device from
the mains voltage. For complete disconnection from the mains voltage,
you must pull the mains plug out of the socket.
Only operate the device with the casing closed.
Caution, components in the system can get very hot.
The activities described in these instructions must always be
performed with the greatest care.
Repairs to the device must only be performed by qualified technicians.
Incorrect repairs could put the user at great risk or cause serious damage
to the equipment (electric shock, risk of fire).
Fujitsu
"Technical data", Page 49
"Getting started", Page
Important notes
as well as
14.
11
Advertisement
Table of Contents
