Table of Contents
Advertisement
Fault
Repeated spinning at
short intervals.
Unsatisfactory washing
result.
Detergent residue on the
laundry.
Grey residues on the
laundry.
Customer Service
Identification
plate
20
All manuals and user guides at all-guides.com
Cause
This is not a fault.
The imbalance compensation system is attempting to balance the load
through repeated spins.
The degree of dirt was higher than
supposed.
Not enough detergent.
Some phosphate free detergents
contain water insoluble residues
that may appear as light spots on
the laundry.
Dirt accumulation from ointments,
fats or oils.
Before calling the Customer Service, please make
sure that you cannot eliminate the fault yourself (refer
to Page 18).
This is because consultation provided by our techni
cians, even within the warranty period, will lead to
costs being incurred by yourself.
Your nearest Customer Service centre can be found
in the index supplied. When calling the Customer Ser
vice, please specify the product number (E Nr.) and
production number (FD Nr.) of your appliance.
These numbers are shown on the rating plate which
can be found on the frame of the open door and also
on the identification plate, enclosed by a thick line, on
the front of the machine behind the nameplate.
E Nr.
Please note the two numbers in the space provided
above.
Action
Select a more suitable programme.
Add detergent according to the
manufacturer's specifications.
Select r Rinse" immediately,
or
brush off spots when laundry is dry.
Add the maximum amount of
detergent and select the highest
permissible temperature next time.
FD
Advertisement
Table of Contents
