Table of Contents
Advertisement
Transport,
e.g. when moving
Preparing and inserting the
transport bolts
30
All manuals and user guides at all-guides.com
Before transporting the washing machine:
- Turn off the water tap,
- Drain any residual washing solution (refer to
Page 16),
- Release the water pressure in the supply hose
(refer to Page 17),
- Disconnect the washing machine from the mains.
- Dismantle the supply and drainage hose,
- Install the transport bolts.
Having transported the appliance and ensured
proper installation and connection, allow the
Q
Drain" programme to run through before starting
the first wash programme.
q Remove the covers.
q Preparing the transit bolt:
Pull the bolt out of the sleeve until the end of the
bolt is flush with the end of the sleeve.
q Insert and tighten the bolts.
The lug on the washer must be located in the
groove in the rear panel of the housing.
Advertisement
Table of Contents
