Table of Contents
Advertisement
Filling laundry
detergent and/or
additive dispensers
Selecting Programmes
Basic programmes
8
All manuals and user guides at all-guides.com
Chamber I:
Detergent for prewash or starch.
Chamber II:
Detergent for main wash, water softener, bleach,
pre soaking agent or stain removal product.
Chamber 2:
Additives, e.g. fabric softener or former.
- Fill at least to lower edge of insert 1.
- If the liquid additive is thick, mix with a little water
before dispensing (prevents clogging of the
overflow).
Select the desired programme (refer also to separate
Programme Chart").
S T
90 C Cottons + Linens
An energy intensive programme for heat resistant
fabrics made from cotton or linen.
For the protection of the drainage pipe, the hot
washing solution is mixed with approx. 5 litres /
1 ½ gal. of cold water before being drained.
0 Z
60 C Intensive Stains
An energy saving programme for stained or very dirty
fabrics.
The extended washing time means that a cleaning
result comparable to that of the 90 C programme is
achieved using considerably less energy.
60 C Cottons + Linens with Prewash
K
For very dirty, hard wearing fabrics.
S T
30, 40, 60 C Cottons + Linens
For hard wearing fabrics
Advertisement
Table of Contents
