Setting Down, Transportation And Storage; Maintenance - Miele SGPA0 Operating Instructions Manual

 To do this, press the Standby button
 on the Comfort handle.

The Standby button is designed
to pause the vacuum cleaner for
short periods of time whilst vacuum-
ing. Do not leave the vacuum cleaner
in Standby mode for long periods.
Otherwise there is a risk of overheat-
ing and damage.
Setting down, transportation
and storage
Park System for pauses during
vacuuming (dia. 23)
(cannot be used with the SEB 236)
The Park System allows you to conveni-
ently park the suction tube and floor-
head during pauses.
 Slot the floorhead or floorbrush into
the parking attachment on the va-
cuum cleaner.
If your vacuum cleaner is on a slop-
ing surface, e.g. a ramp, retract the
telescopic tube fully.
Switching on and off with the Park
system
The vacuum cleaner switches off auto-
matically when the floorhead is slotted
into the park system with the park at-
tachment.
Park system for storage (dia. 24)

Always disconnect the vacuum
cleaner from the power supply when
you have finished using it. Switch off
at the wall socket and withdraw the
plug.
 Stand the vacuum cleaner upright.
Retract the telescopic suction tube
fully so that the vacuum cleaner takes
up less room for storage.
 Slot the floorhead downwards into
one of the parking attachments on
either side of the vacuum cleaner (the
parking attachments cannot be used
with the Electrobrush SEB 236).
This makes the vacuum cleaner easier
to carry or store.

Maintenance


Always disconnect the vacuum
cleaner from the electrical supply for
maintenance work and for cleaning.
Switch off at the wall socket and un-
plug it.
The Miele filtration system consists of
three components:
– Original Miele dustbag
– Motor protection filter
– Original Miele exhaust filter
These will need to be replaced from
time to time to ensure that your vacuum
cleaner performs efficiently.
en
77