Craftsman 28948 Operator's Manual page 9

TO INSTALL MOWER
1, Set parking brake lever and
Power
attachment lift lever
Depress clutch/brake pedal all the way
down and holdo
Pull parking brake lever up and hold,
release pressure from clutch/brake pedal,
then release parking brake lever. Pedal
should remain in brake position. Ensure
parking brake will hold tractor secure.
_CAUTION: Lift lever is spring loaded.
Have a tight grip on lift lever, lower it slowly
and engage in lowest position_ Lift lever is
located on left side of fender.
Li_
Lever
.
Assemble front gauge wheel (W) to
front of mower.
Ho Front Mower Bracket X, Shoulder Bolt
W, Front Gauge Wheel Y, 1¼ 0oDoWasher
Z, 3/8-16 Locknut
3, Turn steering wheel left and position
mower.
• Turn steering wheel to the left as far as it
will go and position mower on right side of
tractorwith deflector shield (Q) to the right.
Front
Transaxle
Q_ Deflector
Shield
A., Mower Side Suspension Arms
B, Retainer Spring
C, Rear Lift Link(s)
D, Right Side Rear Mower Bracket
Eo Front Lift Link Assembly
E Front Suspension Bracket
Ho Front Mower Bracket
tv
Ko
L.
M,,
Q,
S.
W.
9
Left Side Rear Mower Bracket
Belt Tension Rod
Locking Bracket
Engine Clutct_ Pulley
Deflector Shield
Anti-Sway Bar
Front Gauge Wheel