Connecting To Cabinets - Samsung IER-F Series User Manual

Connecting to cabinets

Connect the S-Box (SNOW-1810U) and the cabinet to the installed cabinet for video signal
transmission.
" Connect the S-Box to the external device before connecting the S-Box to the cabinet.
" Before connecting power to the cabinets, connect the Interface Gender (I/G) to the cabinets
first.
" Connect only one type of LED pitch cabinets to a single S-Box. Normal picture quality may
not be obtained if different types of cabinets are connected. Do NOT use different types of
LED pitch cabinets together.
S-Box
(SNOW-1810U) I/G Card
HDBT OUT HDBT IN DATA IN (Reverse) DATA OUT (Forward)
IER-F IFR-F IER-F IFR-F
IER IFR IER IFR
First cabinet Last cabinet
DATA IN DATA OUT DATA IN
Connecting cable for redundancy
1
Connect the HDBT ports on the S-Box and I/G cards using a LAN cable.
2
Connect I/G cards and cabinets using OCM cables.
" Use a cable of CAT 6 (*STP type) or higher.
*STP: Shielded Twisted Pair
" Connect the HDBT by using a LAN cable that is 15–100 m in length. If you use a cable that is
out of specified length range, the signal quality may be unstable.
" Use the LAN cables recommended on the HDBaseT website (http://hdbaset.org/hdbaset-
recommended-cables). If a LAN cable that is not recommended is used, the HDBT signals
may become unstable.
DATA OUT
12