Table of Contents
Advertisement
The push button is designed to change the volume or listening programs of the hearing aid, based on different
ways it is pressed.
If necessary, your hearing care professional can change the default settings for the push button and fill in the
following table with your new settings:
Button action
Short press up
Short press down
Long press up (3 seconds)
Long press down (3 seconds)
NOTE: If you have two hearing aids with the Synchronized Push Button enabled, program changes to one
hearing aid automatically repeat in the second hearing aid. When you change a program in one hearing
aid, it responds with one or more beeps. The same number of confirmation beeps follows in the second
aid. This function can also be configured to allow one side to control volume increase and the other side to
control volume decrease. The volume changes to one hearing aid are repeated on the other side to keep
the levels the same.
20
Using your hearing aids
Default setting
Increases volume
Decreases volume
Changes program
Activates streaming
New setting
Advertisement
Table of Contents
