910209 - Battery Powered T-Handle Impact Wrench Section 1: Overview and Safety Battery Powered T-Handle Impact Wrench Overview RRP designs and manufactures equipment primarily for the repair and new construction of rail and railroad tie track maintenance. The T-Handle Impact Wrench is a portable, battery powered, impact wrench and its designed allows the operator greater flexibility in tighter work areas.
Do not make any modifications without authorization or written approval from Racine Railroad Products. Replace all Racine Railroad Products and OEM parts with genuine Racine Railroad Products and OEM parts. Using non-OEM parts may compromise the safety of the machine.
910209 - Battery Powered T-Handle Impact Wrench Always shut disconnect the power source and make sure that all controls are in a safe position and install all appropriate locking and safety devices before doing any of the following: • Lubricating •...
Page 8
910209 - Battery Powered T-Handle Impact Wrench Make sure the power cord is in place so that it will not be stepped on, loosened, or otherwise damaged or under pressure Extension cords must not be used unless necessary. The use of extension cords may cause a fire and a risk of electric shock.
910209 - Battery Powered T-Handle Impact Wrench Charging Process The battery of the new machine is not fully charged. 1. Connect the power cord to the charger and then plug the charger into a suitable power outlet before connecting the battery.
910209 - Battery Powered T-Handle Impact Wrench Section 3: Tool Operation Personal Protective Equipment Before operating this machine, make sure that all general safety precautions are observed, and that proper personal protective clothing is worn as described below. At a minimum, operators should wear the following Personal Protective Equipment: 1.
910209 - Battery Powered T-Handle Impact Wrench If LED 1and LED 4 blink ...It indicates high temperature alarm. If LED 1 and LED 3 blink ..It indicates low temperature alarm. LED1 and LED2 blink ....It indicates an overcurrent alarm. Socket Installation Turn off the battery when installing the socket.
910209 - Battery Powered T-Handle Impact Wrench Powering On the Wrench 1. Press the battery power switch to ON. The Boot LED will light up red, indicating the default gear (6 2. Press the safety switch on the left side of the wrench handle.
910209 - Battery Powered T-Handle Impact Wrench After Use 1. Turn the power OFF as soon as possible after operation. The battery function automatically turns OFF after 3 minutes of no operation. To restart, press the safety switch. Section 4: Maintenance...
910209 - Battery Powered T-Handle Impact Wrench Storage 1. If not being used for an extended period of time, remove the socket from the machine and stored it separately. 2. Apply anti-rust oil on the surface of the machine and keep it in a ventilated, dry, corrosive, gas-free environment.
910209 - Battery Powered T-Handle Impact Wrench Section 5: Parts and Service Support Technical Support & Service Telephone and web-based technical support is available for current production models through our Customer Service Department. Service Manuals and limited technical support may be available for models that are no longer in production.
• Any locally assigned identification Vendor Parts Warranty Period Other equipment and parts used, but not manufactured by Racine Railroad Products, Inc., are covered directly by the manufacturer's warranty for their products. Warranty Parts and Service We will repair or replace, without charge, F.O.B. factory, Racine, Wisconsin, USA, any part Racine Railroad Products manufactures which is proven to be defective during the warranty period.