910211 - Battery Powered On-Track 1” Impact Wrench Section 1: Overview and Safety On-Track 1” Impact Wrench Overview RRP designs and manufactures equipment primarily for the repair and new construction of rail and railroad tie track maintenance. The On-Track 1” Impact Wrench is a portable, battery powered, quality product with unique features that make this the perfect solution for your rail maintenance requirements.
Do not make any modifications without authorization or written approval from Racine Railroad Products. Replace all Racine Railroad Products and OEM parts with genuine Racine Railroad Products and OEM parts. Using non-OEM parts may compromise the safety of the machine.
910211 - Battery Powered On-Track 1” Impact Wrench Always shut disconnect the power source and make sure that all controls are in a safe position and install all appropriate locking and safety devices before doing any of the following: •...
910211 - Battery Powered On-Track 1” Impact Wrench Battery and Charger If the battery is cracked or damaged, do not insert it into the charger. This can cause electric shock. Do not allow liquid to enter the charger as this may cause an electric shock accident. Do not place chargers or batteries in hot, unventilated environments such as metal sheds or trailers.
910211 - Battery Powered On-Track 1” Impact Wrench To get the longest possible battery life, we recommend: • Store the battery in cool areas and charge them in such areas. Temperatures above or below normal room temperature can shorten the life of the battery.
910211 - Battery Powered On-Track 1” Impact Wrench Section 3: Tool Operation Personal Protective Equipment Before operating this machine, make sure that all general safety precautions are observed, and that proper personal protective clothing is worn as described below. At a minimum, operators should wear the following Personal Protective Equipment: 1.
910211 - Battery Powered On-Track 1” Impact Wrench If LED 1and LED 4 blink ...It indicates high temperature alarm. If LED 1 and LED 3 blink ..It indicates low temperature alarm. LED1 and LED2 blink ....It indicates an overcurrent alarm.
910211 - Battery Powered On-Track 1” Impact Wrench Socket Installation Power Off the battery when installing the socket. During installation, a steel wire is threaded into the hole. 1. Thread the wire through the socket and bend both sides of the wire with a long nose plier.
910211 - Battery Powered On-Track 1” Impact Wrench Wrench Operation 1. Adjusting the Torque buttons are used to adjust the torque power. • Press the to increase the torque power. • Press the button to decrease the torque power. •...
910211 - Battery Powered On-Track 1” Impact Wrench 6. Press the safety button on the right side of the control box to operate the Tightening or Loosening switches. 7. Place the socket over the bolt and start the operation. 8. The wrench stops operation automatically when it reaches the set torque.
910211 - Battery Powered On-Track 1” Impact Wrench Storage 1. If not being used for an extended period of time, remove the socket from the machine and stored it separately. 2. Apply anti-rust oil on the surface of the machine and keep it in a ventilated, dry, corrosive, gas-free environment.
910211 - Battery Powered On-Track 1” Impact Wrench Section 5: Parts and Service Support Technical Support & Service Telephone and web-based technical support is available for current production models through our Customer Service Department. Service Manuals and limited technical support may be available for models that are no longer in production.
• Any locally assigned identification Vendor Parts Warranty Period Other equipment and parts used, but not manufactured by Racine Railroad Products, Inc., are covered directly by the manufacturer's warranty for their products. Warranty Parts and Service We will repair or replace, without charge, F.O.B. factory, Racine, Wisconsin, USA, any part Racine Railroad Products manufactures which is proven to be defective during the warranty period.