Table of Contents
Advertisement
Care
Care and Cleaning
„ Titanium apatite deodorizing filter
1.
Take off the titanium
apatite deodorizing filter.
• Open the front panel and pull out the air filters.
• Hold the recessed parts of the frame and unhook
the 4 claws.
Claw
Claw
2.
Clean or replace the
titanium apatite
deodorizing filter.
[Maintenance]
2-1 Vacuum dust, and soak in lukewarm
water or water for about 10 to
15 minutes if dirt is heavy.
• Do not remove the filter from frame when
washing with water.
2-2 After washing, shake off remaining
water and dry in the shade.
• Since the material is made out of polyester, do not
wring out the filter when removing water from it.
33
[Replacement]
Remove the tabs on the filter
frame and replace with a new
filter.
• Do not throw away the filter frame. Reuse the
filter frame when replacing the titanium apatite
deodorizing filter.
• Dispose of the old filter as non-flammable waste.
3.
Set the filters as they were
and close the front panel.
• Press the front panel at both sides and the
central area.
NOTE
• Operation with dirty filters:
– cannot deodorize the air,
– cannot clean the air,
– results in poor heating or cooling,
– may cause odor.
• Dispose of old filters as non-flammable waste.
• To order a titanium apatite deodorizing filter, contact the
dealer where you bought the air conditioner.
Titanium apatite deodorizing filter
Item
(without frame) 1 set
Part No.
KAF970A46
Advertisement
Table of Contents
