OFF TIMER Operation
NOTE
Notes on TIMER operation
• When TIMER is set, the present time is not displayed.
• Once you set ON/OFF TIMER, the time setting is kept in the memory. The memory is canceled when remote controller batteries are
replaced.
• When using the ON/OFF TIMER to start/stop operation, the actual operation start/stop time may differ from the time set. (Maximum of
about 10 minutes)
NIGHT SET mode
• When the OFF TIMER is set, the air conditioner automatically adjusts the temperature setting (0.9°F (0.5°C) up in COOL, 3.6°F (2.0°C)
down in HEAT) to prevent excessive cooling (heating) for your pleasant sleep.
Timer functions are useful for automatically switching the air conditioner on or
off at night or in the morning. You can also use OFF TIMER and ON TIMER in
combination.
To use OFF TIMER operation
• Check that the clock is correct.
If not, set the clock to the present time.
1.
Press
• "
" is no longer displayed on the LCD.
2.
Press
point you like.
• Each pressing of either button increases or decreases the time setting by
10 minutes. Holding down either button changes the time setting rapidly.
3.
Press
• "
" and setting time are displayed on the LCD.
• The TIMER lamp lights orange.
Display
To cancel OFF TIMER operation
Press
• "
" and setting time are no longer displayed on the LCD.
• "
" and day of the week are displayed on the LCD.
• The TIMER lamp goes off.
Page 10
.
"
" is displayed on the LCD.
"
" blinks.
until the time setting reaches the
again.
.
Operation
20