Safety Information - Project Source PSWS-B7-20 Instructions Manual

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate, or install the
product.
This manual contains information that relates to PROTECTING PERSONAL SAFETY and PREVENTING
EQUIPMENT PROBLEMS. It is very important to read this manual carefully and understand it thoroughly
before using the product. The symbols listed below are used to indicate this information.
DANGER
Potential hazard that will result in serious injury or loss of life.
WARNING
Hazard that could result in serious injury or loss of life.
CAUTION
Potential hazard that may result in moderate injury or damage to equipment.
SAFETY RECOMMENDATIONS
These precautions are intended for the personal safety of the operator and others working with the
operator. Failure to follow these instructions may result in a permanent loss of vision, serious personal
or even fatal injury, property damage and/or tool damage. Please take time to read and understand
them. Safety is a combination of common sense, staying alert and knowing how your saw works.
WARNING
To avoid mistakes that could cause serious injury, DO NOT plug in the saw until you have read and
understood the rules.
BEFORE USE
• For safe handling of this product, the user must have read and understood the instructions for use
before using it for the first time.
• Observe all safety instructions! If you DO NOT observe the safety instructions, you will endanger
yourself and others.
• Keep all instructions for use and safety instructions for future reference.
• Attach the instructions for use, if you pass on the product to someone else.
• KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents.
• All parts of the product, safety devices in particular, must be correctly installed to ensure faultless
operation.
OPERATION/WORKPLACE
• KEEP GUARDS IN PLACE and in working order.
• REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting
wrenches are removed from tool before turning it on.
• KEEP CHILDREN AWAY. All visitors should be kept at a safe distance from work area.
• MAKE WORKSHOP CHILDPROOF with padlocks, master switches or by removing starter keys.
• DO NOT FORCE TOOL. It will do the job better and safer at the rate for which it was designed.
• USE THE RIGHT TOOL. DO NOT force tool or attachment to do a job for which it was not designed.
• DO NOT OVERREACH. Keep proper footing and balance at all times.
5
kobalttools.com