Operating Instructions - Project Source PSWS-B7-20 Instructions Manual

OPERATING INSTRUCTIONS

WARNING
• DO NOT allow familiarity with the tools to make you careless. Remember that a careless fraction of a
second is sufficient to inflict serious injury.
• ALWAYS wear eye protection with side shields marked to comply with ANSI Z87.1. Failure to do so
could result in objects being thrown into your eyes, resulting in possible serious injury.
• DO NOT use any attachments or accessories not recommended by the manufacturer of this tool.
The use of attachments or accessories not recommended can result in serious injury.
Applications
You may use this tool for the purpose listed below:
• Straight line cutting operations such as cross cutting, mitering, ripping, and beveling.
Note: This saw is designed to cut man-made tile, pavers, and stone tile products only.
On/Off Switch
This saw is equipped with a switch that has a built-in
locking feature. This feature is intended to prevent
unauthorized and possible hazardous use by children
and others.
To Turn the Saw On
With the switch key inserted into the switch, lift the
switch to turn ON (I).
To Turn the Saw Off
Press the switch down to turn OFF (O).
Locking Saw
With the saw turned OFF, remove the safety key from
the switch. Store the key in a safe place.
WARNING
• In the event of a power failure or when the tool is not
in use, turn the switch OFF. This action will prevent
the tool from accidentally starting when power returns.
• ALWAYS make sure your workpiece is not in contact
with the cutting wheel before operating the switch to
start the tool. Failure to heed this warning may cause
the workpiece to be kicked back toward the operator
and result in serious personal injury.
• To reduce the risk of accidental starting, ALWAYS make
sure the switch is in the OFF position before plugging
tool into the power source.
ON ON
LOCKED LOCKED
17
OFF OFF
kobalttools.com