Assembly Instructions - Project Source PSWS-B7-20 Instructions Manual

ASSEMBLY INSTRUCTIONS

Unpacking
This product requires assembly.
• Carefully lift the saw from the carton and place on a level work surface.
WARNING
• DO NOT use this product if any parts in the Package Contents and Hardware Contents lists
are pre-assembled to your product when you unpack it (apart from those specified as being
pre-assembled).
Parts on this list are not assembled to the product by the manufacturer and require customer installation.
Use of a product that may have been improperly assembled could result in serious personal injury.
1. Inspect the tool carefully to make sure no breakage or damage occurred during shipping.
2. DO NOT discard the packing material until you have carefully inspected and operated the tool.
3. The saw is factory set for accurate cutting. After assembling it, check for accuracy.
4. If any parts are damaged or missing, please call 1-866-389-8827 for assistance.
WARNING
• If any parts are damaged or missing, DO NOT operate this tool until the parts are replaced. Use of
this product with damaged or missing parts could result in serious personal injury.
• DO NOT attempt to modify this tool or create accessories not recommended for use with this tool.
Any such alteration or modification is misuse and could result in a hazardous condition leading to
possible serious personal injury.
• DO NOT connect to power supply until assembly is complete. Failure to comply could result in accidental
starting and possible serious personal injury.
Tile Cutting Wheel
For maximum performance and safety, it is recommended that you use the 7 in. cutting wheel provided
with your saw. Additional cutting wheels are sold separately.
WARNING
• DO NOT use cutting wheels rated less than the no load speed of this tool. Failure to heed this warning
could result in personal injury. DO NOT use a wheel with cracks, gaps, or teeth.
Installing the Tile Cutting Wheel and Riving Knife
WARNING
• A 7 in. tile cutting wheel is the maximum wheel capacity of the saw. NEVER use a wheel that is too
thick to allow wheel washer to engage with the flats on the arbor. Larger wheels will come in contact
with the blade guard, while thicker wheels will prevent the arbor nut from securing the wheel on the
arbor. Either of these situations could result in serious accident and can cause serious personal injury.
11
kobalttools.com