Hisense 85R7 Quick Setup Manual page 21

Pairing the Remote Control (only for bluetooth remote control)
1. Press the MENU button, and then select Settings > System > Bluetooth >
Remote Pairing.
2. Press and hold the MENU button until your TV and remote control are paired
successfully. Make sure your remote is close to this TV around 3 meters.
NOTES
This function is not available on certain models in specific geographical areas.
If an unknown error occurred with the remote then it could have been caused by
interference. Try to remove what's causing the interference and pair it again.
If an unknown error occurred in the remote control while the battery power is normal, you
can take out the batteries, press any key for 1~2 seconds, and insert them back. then the
remote control will work normally.
The remote cannot be paired to the TV while the TV is in standby mode.
Remote Control Operation Range
1. The remote control can work at a distance
of up to 8 meters in front of the TV set.
2. The remote control angle: taking the
remote sensor as an apex, 6 meters
away, its controlled horizontal angle is
within ±30°, while the vertical angle is
within ±15°.
3. The operating distance may vary
depending on the brightness of the room.
Disposal of this unit
Product should not be damaged, dismantled or thrown in municipal waste.
It should be packed and handed over to authorised re-cycler.
Remote Control
14