Assembling Your Machine; Getting Started - Dyson purifier cool Gen1 User Manual

Assembling your machine

Use both hands to lift your machine out of the box, by its base.
Do not lift out by the loop amplifier.
Dyson Purifier Cool Gen1
Supplied with a combined glass HEPA+Carbon filter.

Getting started

Place the remote control on top
of the machine with the buttons
facing down.
Plug in and switch on.
An image of the air purifier fan with
the remote placed on the top of the
loop amplifier and the location of the
standby on/off button on the top of
the base of the machine.
Shroud
Shroud release buttons
The layout of the remote control with the power button on the top left, the
airflow speed toggle button in the middle left and the oscillation button on
the bottom left. On the top right-hand side is the Auto mode button, then
going downwards is the Night mode button and then the Information menu
button at the bottom.
Remote control
Standby on/off
Airflow speed
Amplifier loop
Oscillation on/off
Standby on/off
LCD screen
Filters (inside)
Auto mode
Night mode
Information menu