Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per Dyson Purifier Cool Gen 1 o cerca il tuo prodotto tra le migliori offerte di Trattamento Aria Dyson Purifier Cool Gen1 logo User manual Front view of the Dyson Purifier Cool Gen1 fan, showing the amplifier loop...
Assembling your machine Use both hands to lift your machine out of the box, by its base. Do not lift out by the loop amplifier. Dyson Purifier Cool Gen1 Supplied with a combined glass HEPA+Carbon filter. Getting started The layout of the remote control with the power button on the top left, the airflow speed toggle button in the middle left and the oscillation button on the bottom left.
Power and continuous monitoring Stand-by on/off Press the Standby on/off button on your Dyson purifying fan or remote control to stop your machine. It will continue to monitor the air quality. Continuous monitoring Continuous monitoring is turned off by default. Once turned on, it will always be active until you turn it off again.
Information menu Press this button to scroll through the information being monitored by your Dyson purifying fan. Information about particulate matter and filter levels is shown on the LCD screen. When a particular type of pollutant causes air quality to decrease, a symbol for the pollutant will show on the LCD screen.
Auto mode Set your Dyson purifying fan to Auto mode and the on-board sensors will The remote control with intelligently adjust the settings of the machine according to the air quality. the Auto mode button above the Night mode Air quality: your machine will pause when the target air quality has been button on the top right.
Changing your HEPA+Carbon filter Before changing your filter, switch off and unplug your Dyson purifying fan. The remaining filter life is displayed on the screen and will indicate when your non-washable filters need replacing. Press the Information button on your remote.
Looking after your machine To always get the best performance from your Dyson purifying fan, it’s important to regularly clean it and check for blockages. Cleaning your machine If your machine is dusty, wipe with a damp lint-free cloth. Look for blockages in the air inlet holes on the filter and the small aperture inside the loop amplifier.