Advertisement
Assembling your machine
Use both hands to lift your machine out of the box, by its base.
Your machine comes with a HEPA filter, carbon filter and
permanent catalytic filter. These are already installed in
your machine.
Lift the conic amplifier out of the box and place it on the top of
your machine.
Rotate the conic amplifier until it clicks securely into place.
Plug in and press the power button.
Positioning your machine
Your machine is fitted with wheels to make it easier to move.
Position your machine on a level floor.
For the most effective purification, position your machine on
the edge of the room with the conic amplifier pointing to the
furthest point, along the wall.
You can also position your machine facing diagonally across
the room.
The purifier positioned on the edge of a room. A blue arrow shows the
conic amplifier direction, pointing to furthest point, along the wall.
The purifier positioned on the edge of a room. A blue arrow shows
the conic amplifier direction, pointing diagonally across the room.
Image demonstrates
how to assemble the
Dyson HEPA Big+Quiet
Formaldehyde
purifier's conic
amplifier. Position and
twist. A click indicates a
secure lock.
Advertisement
