Related Manuals for Dyson Purifier Cool Autoreact
Summary of Contents for Dyson Purifier Cool Autoreact
-
Page 1: Table Of Contents
Dyson Purifier Cool Auto React User manual Front view of the Dyson Pure Cool Auto React air purifier fan, showing the amplifier loop and mesh filter cover. Contents Oscillation Assembling your machine Night mode and Sleep timer Getting started Changing your HEPA+Carbon filter... -
Page 2: Assembling Your Machine
Do not lift out by the loop amplifier. Assemble your machine with the filters that are supplied. The air purifier fan with the filter covers open Dyson Purifier Cool Auto React showing a HEPA plus Supplied with a HEPA+Carbon filter. carbon filter located in the filter covers. -
Page 3: Power And Continuous Monitoring
Power and continuous monitoring Stand-by on/off Press the Standby on/off button on your Dyson purifying fan or remote control to stop your machine. It will continue to monitor the air quality. Continuous monitoring Continuous monitoring is turned off by default. Once turned on, it will always be active until you turn it off again. -
Page 4: Information Menu
Information menu Press this button to scroll through the information being monitored by your Dyson purifying fan. Information about air quality, temperature, humidity and filter levels is shown on the LCD screen. When a particular type of pollutant causes air quality to decrease, a symbol for the pollutant will show on the LCD screen. -
Page 5: Auto Mode
Auto mode Set your Dyson purifying fan to Auto mode and the on-board sensors will The remote control with intelligently adjust the settings of the machine according to the air quality. the Auto mode button below the Information Air quality: your machine will pause when the target air quality has been button on the right. -
Page 6: Changing Your Hepa+Carbon Filter
Changing your HEPA+Carbon filter Before changing your filter, switch off and unplug your Dyson purifying fan. The remaining filter life is displayed on the screen and will indicate when your non-washable filters need replacing. Press the Information button on your remote. -
Page 7: Changing Your Hepa And Carbon Filters
Changing your HEPA and carbon filters Before changing your filter, switch off and unplug your Dyson purifying fan. The remaining filter life is displayed on the screen and will indicate when your non-washable filters need replacing. Press the Information button on your remote. -
Page 8: Looking After Your Machine
Looking after your machine To always get the best performance from your Dyson purifying fan, it’s important to regularly clean it and check for blockages. Cleaning your machine If your machine is dusty, wipe with a damp lint-free cloth. Look for blockages in the air inlet holes on the filter and the small aperture inside the loop amplifier.