General - Kogan UN8920 User Manual

SETTINGS (cont'd)
Connect via WPS PIN: This is a method to connect to an access point using a
Wi-Fi Protected Setup-Personal Identification Number (WPS-PIN). Select the
access point you want to connect to. Enter the PIN displayed on the access
point's Wi-Fi device.
Advanced Wi-Fi Settings: Once you connect to a wireless network, you
can view connection information such as detailed IP address information. In
addition, you can change the IP address and DNS server address you want
to connect to by pressing the Edit button. IPv6 setup does not support Edit
function.
Device Connection Settings
Auto Device Detection: It automatically sets to enable you to control the
devices connected via the HDMI with the Magic Remote
HDMI-CEC: With a single remote control, you can easily manage various
devices such as a soundbar or set-top box connected to a TV with HDMI.
Up to three devices can be connected and used simultaneously.
Auto Power Sync: If Auto Power Sync is set to On, turning on a HDMI-CEC
Bluetooth devices: This feature enables you to connect a wireless keyboard
to your TV. Turn on the device, set it to pairing mode, and then click Connect
on your TV screen. If there is a wireless keyboard previously connected, it will
be automatically reconnected to your TV once your TV turns on. To disconnect
the existing connection, click Disconnect.
Universal Control Settings: If you set up the universal remote control, you can
control peripheral devices connected to the TV with the Magic Remote instead
of their own remote controls.
Mobile Connection Management
You can set to use a smart device connected to the TV to control the TV or
manage the connection history.
Screen Share: You can delete the connection history of the device that was
connected to the TV through Screen Share.
TV On With Mobile: If Turn On Via Wi-Fi or Turn On Via Bluetooth is set to
On, you can turn on your TV using an application that supports TV On With
Mobile.
NOTES
• The TV should be connected to a network.
• The TV and the device to be used should be connected to the same network.
• The Turn On Via Wi-Fi feature must be used in an app on a smart device that
supports the feature.
• Not all smartphones may be compatible with the Turn On Via Bluetooth
feature.
• The TV must be plugged in, with the wall outlet switched on.
• To connect for the first time, make sure the device to be used is ready to
connect.

GENERAL

AI Service
Setting the AI Service: Enable the recommended services based on the usage
history.
Voice Recognition Help and Settings: Change settings related to the speech
AI Recommendation: Enable content recommendation messages according
to your content viewing history and app usage history.
Content Recommendations: Enable content recommendations or
introductions to new features based on your pattern of viewing TV and using
apps.
Network-Based Personalisation Recommendations: Enable
recommendations for programmes and content based on viewing history
through the network.
• On: Get more recommendations through the server.
•
Delete Usage Data: It resets the content view history and the app usage
history. If you reset them, it takes some time to receive recommendations for
contents again.
21