Programmes - Kogan UN8920 User Manual

SETTINGS (cont'd)
Additional settings
TV Installation Type: This mode optimises the sound based on the TV setup.
Select between 'Stand' or 'Wall Mounted'. This setting is only available when
set to Internal TV Speaker.
Volume Mode:
• Auto Volume:
broadcasting companies so you can always listen to programmes at the
• Volume Increase Amount: Select Low/Medium/High to adjust the volume
range. Higher values increase increments. This setting is only available for
Internal TV Speaker.
DTV Audio Setting
select the audio type you want.
If set to Auto, the search order is AC4 > HE-AAC > Dolby Digital Plus > Dolby
Digital > MPEG; output is produced in the first audio format found.
If the selected Audio Format is not supported, another Audio Format may be
used for output.
AV Sync Adjustment
Adjusting AV Synchronization: Adjusts the synchronization of the sound from
the speaker that is working. The closer to, the slower the audio output.
Bypass: Outputs the broadcast signals or the sound from external devices
without any audio delay. The audio may be output before the video because of
the time the TV takes to process the video input. Available options vary based
on Sound Out setting.
HDMI Input Audio Format: You can set the audio format for each HDMI input.
When the voice delivered through the HDMI port is not synchronized, set it to
PCM
LG Sound Sync: Connect the LG Sound Sync device to the optical digital
input port and set Sound Out to Optical. By setting this feature to On, you can
adjust the volume of the connected LG Sound Sync device using a TV remote
control. If the auto-power feature of the sound bar that supports LG Sound
Digital Sound Out: Configure the Digital Sound Out settings. This setting is
only available when Sound > Sound Out is set to Optical/HDMI ARC. When

PROGRAMMES

Auto Tuning: Automatically tunes the programmes.
1. Select Country where the TV is used. Programme settings change
depending on the country you choose.
2. Initiate Auto Tuning.
3. Set Auto Tuning following screen instructions.
NOTES
• If Input Source is not connected properly, programme registration may not
work.
• Auto Tuning only finds programmes that are currently broadcasting.
• If Safety is turned on, a pop-up window will appear asking for password.
Manual Tuning: This function is for manually searching and saving
programmes. For digital broadcasting, signal strength and signal quality can
be checked.
Signal Test: Shows the channel frequency information. Only available in
Antenna or Cable mode.
Programme Manager
Edit Programmes: You can edit the selected programmes from all the stored
programmes or add/delete them to/from the favourite programmes.
1
2
19