Replacing The Remote Batteries - PROTRON PLTV-4250 User Manual

OMPLTV4250.book Page 15 Thursday, February 16, 2006 10:22 AM
Button(s)
Note: To use a universal remote with your display, program the remote to control any NEC
television.

Replacing the Remote Batteries

The remote requires two AAA batteries, which are held in a small
enclosure on the rear of the remote.
To replace the batteries:
1. Release the tab and pull the enclosure out of the remote.
2. Remove the old batteries and replace them with the new
batteries. Ensure the batteries are oriented as indicated in the
enclosure.
3. Snap the enclosure back into the remote.
Function
Cycles through the closed captioning modes: Off, C1–4, and T1–4
Used to navigate display menus
Selects the highlighted item or confirms the current adjustment
15
Using the Remote Control