25 |
DT 4.10, DT 4.16, DT 4.25, DT 4.40, DX 4.10, DX 4.16, DX 4.25, DX 4.40
8.3
MAINTENANCE INTERVALS
The following overview shows the maintenance intervals:
DT 4.10, DT 4.16, DT 4.25, DT 4.40
Component
Rotary vane ¹
Intake filter - F1 (optional)
²
C - Separator filter - F2
(optional) ²
Housing
Protective device
General overhaul
Table 8.3: Maintenance intervals 1
DX 4.10, DX 4.16, DX 4.25, DX 4.40
Component
Rotary vane ¹
Intake filter - F1 (optional)
²
C - Separator filter - F2
(optional) ²
Housing
Protective device
General overhaul
Table 8.3: Maintenance intervals 2
40 - 200 h
check, clean, (switch),
clean, (switch)
check
clean
Visual inspection
40 - 200 h
check, clean, (switch),
clean, (switch)
check
clean
Visual inspection
3000 h
measure, (switch)
7500 h
measure, (switch)
8000 h (min. 1x/3a)
execute
20000 h (min. 1x/5a)
execute