Component Illustration - Becker DT 4.25 Translation Of The Operating Instructions

14 | DT 4.10, DT 4.16, DT 4.25, DT 4.40, DX 4.10, DX 4.16, DX 4.25, DX 4.40
4.4

COMPONENT ILLUSTRATION

DT 4.10, DT 4.16, DT 4.25, DT 4.40, DX 4.10, DX 4.16, DX 4.25, DX 4.40
Position Component
1 Outlet (variants with cooler)
2 Device cover
3 Admission
4 Eyebolt
Outlet (variants without
5
radiator)
6 Pump unit
7 Slider
8 Side cover
9 Filter group
10 Device cover
Terminal box with motor type
11
plate
12 Motor
13 Unit base
14 Device type plate
15 Pressure regulating valve
Table 4.4: Component illustration 1
Function
Connection of the pressure line
Flow optimisation, noise reduction
Connection of the vacuum line
Anchor point
Connection of the pressure line
The pump unit includes pump housing, piston and slide valve
Forms the compression chambers
Lateral closure of the pump casing
Air filtration
Flow optimisation, noise reduction
Electrical connection; conformity mark and technical data - Motor
Drive
Stable installation and fastening of the pump
Marking of conformity and technical data - Pump
Setting the required pressure