SpectraLink Link 150 M3 Quick Reference Manual

Link 150 M3 MCU Quick Reference
Part Number: 72-0075-02-B.doc

Register a Wireless Telephone (handset)

1. Make sure all unregistered handsets are off.
2. Move the mode switch to the
position.
3. Press the button until the desired line
STEP
to be registered is flashing red. Only
unregistered lines can be registered.
4. Press on the handset that needs to be
PWR
registered and wait at least three seconds.
The LED should change to solid red once
the phone is registered.
5. Return the mode switch to the
position.
6. To assign the extension number, hold down
the key on the handset until
FCN
displays. Press the
Level
EXTENSION displays on the handset. Press
then enter the correct extension number.
7. When the handset is turned on, the
extension will be displayed. Test the handset
by placing a call to each handset to verify
that the correct handset rings.

Unregister a Wireless Telephone

1. Move the mode switch on the MCU to the
REGISTER position. If your system has more
than one MCU, be sure to move the switch
on the correct MCU. The line indicator
LEDs now show which lines have handsets
registered.
2. Use the STEP button to select the line to be
unregistered. The line indicator LED for a
line that has a handset registered to it will
flash with the LED mainly on.
/
3. Press the
DEL ENTER
indicator LED for the selected line will be
off with a short on flash.
4. Register the new handset or return the mode
switch to the NORMAL
REGISTER
NORMAL
Volume
key until
# >
0 ,
button. The line
position.
Page 1