Remote Pairing Mode - Python 44606P Owner's Manual

Note The remote control automatically exits the configuration
mode if no buttons are pressed within 30 seconds. Feature
changes are not saved if programming exits after this lapse.
Keypad Lock
Options: OFF, Auto
When Off, the buttons do not lock and always perform a com-
mand when pressed. When set to Auto, the remote buttons lock
after a 20 second lapse between button presses to prevent unin-
tentional operations.
Note If a button is pressed when locked, a fault tone plays as an
alert. To unlock the buttons, press the
by the
Car 2
Options: OFF, ON
The remote controls can control two systems independently.
When set to Off, the Car Select feature is not available. When
set to On the Car Select feature is enabled. See "Car Select" on
page 22 for details on using a remote with two systems.

Remote Pairing Mode

The following instruction will step you through the remote pairing op-
eration.
Prepare the vehicle system for pairing:
Turn the key to the ON position.
1.
© 2016 Directed. All rights reserved.
button, tones are emitted to confirm unlocking.
AUX
AUX
AUX
button followed
13