Python 44606P Owner's Manual page 18

Within five seconds press and release the Control Center button
2.
one time.
Within five seconds, press and hold the Control Center button.
3.
The status LED will flash one time and the horn (if connected)
honks once to confirm the system is ready for remote pairing.
Release the Control Center button and proceed to next step.
4.
Prepare the remote control for pairing:
5. Enter programming by pressing and holding the
eight seconds to access the Main Menu.
Press and hold the
6.
flashes indicate the remote control is ready to pair.
Press the
7.
8. Wait several seconds as the remote generates a security encryp-
tion and sends it to the Control Center. The horn honks to indicate
Pairing is complete.
If pairing is not successful press and release the
and then repeat steps 6 and 7.
Pairing will exit if:
• Step 7 is not completed within 60 seconds
• The doors are closed
• The ignition is turned off.
14
AUX
button for one second, 3 transmit LED
button.
AUX
AUX
AUX
© 2016 Directed. All rights reserved.
AUX
button for
AUX
button once