Harken 2698 Instructions

Tel: 262-691-3320, Fax: 262-701-5780 • Web: www.harken.com, Email: harken@harken.com
Part
No. Description
2698 18 mm single
2158 18 mm double
2161 18 mm single/narrow
2171 29 mm single
2173 40 mm single
2180 18 mm triple
*Sailmaker twine for 2161, 2171, 2173 not included.
Terms
Head
Mouth
2. Always lash to mouth of the block. Head is not strong enough to secure line.
3. The 18 mm blocks ship with lashing line. Use
two laps of supplied line to create four strands to
match the maximum working load of the block.
I N S T R U C T I O N S
N15W24983 Bluemound Rd, Pewaukee, WI 53072-4974
Specifications
Max sheet line Ø
Sheave
mm
Ø
18 mm 5
18 mm 5
18 mm 5
29 mm 7
40 mm 9
18 mm 5
Bail
2 Laps
4 Lashing
Strands
Sheave
Head
Block
™
Max working load
in kg lb
3/16 125 275
3/16 204 450
3/16 125 275
9/32 350 770
11/32 650 1435
3/16 275 600
Planning Installation
CAUTION! Avoid injury or damage to
equipment. Follow these precautions:
1. Lash only to objects with rounded edges. Avoid
sharp corners.
Rounded
Head
4. Blocks 2161, 2171, 2173: Use sailmaker's
twine or similar to secure lashing strands to head.
Blocks 2171, 2173: Use tubes at head to secure
lashing strands to head.
2161
Breaking load
Replacement
Lashing Line*
kg lb
450 992 HCP1438
680 1500 HCP1438
450 992 HCP1438
700 1540 Line not included
1300 2870 Line not included
500 1100 HCP1438
Sharp
2171, 2173