Lenovo V14 Gen 4 i Hardware Maintenance Manual page 99

Figure 102. Remove the camera rubbers
Go to https://support.lenovo.com/partslookup
replacement parts:
Microphone rubbers
Removable tape
Remove the EDP cable
Make sure the following FRUs (CRUs) have been removed.
"Remove the LCD module" on page 88
"Remove the LCD bezel" on page 90
"Remove the LCD panel" on page 91
Step 1. Disconnect the EDP cable from the camera board and then remove the EDP cable.
Figure 103. Disconnect the EDP cable from the camera board and then remove the EDP cable
Go to
https://support.lenovo.com/partslookup
replacement parts:
EDP cable
Removable tape
Remove the camera
Make sure the following FRUs (CRUs) have been removed.
to look up the Lenovo part numbers of the following
to look up the Lenovo part numbers of the following
.
Chapter 4 Removing a FRU or CRU
93