Advertisement
Mount the furniture door to the
l
front of the washer using the
hinges. Fix the spacers (I) in
place with the 2 screws (J) and
then fix the hinges with 2 screw
(H).
*Do not over-tighten screws or
l
holes will be damaged*
We suggest mounting the
furniture door so that it opens
towards the left, which is the
same direction as the porthole
door. This will leave more
space when you are loading
washing into the appliance.
Slide
the
washer
l
opening of the size indicated in
the diagram opposite. A furniture
plinth may be run across the front
of the appliance, but its height will
be dictated by the height the
washer is set at.
The 4 adjustable feet allow the
l
height of the washer to be
adjusted from 820 mm to a
maximum of 840 mm.
Raise the feet to your desired
height and then fully tighten the
lock nut to the base of the
washer (Howdens' default set-
up-top of door at c.888mm
from floor).
H
into
an
9
*
Do Not Use
Power tool
I
(Self-tap screws)
J
Advertisement
