Advertisement
- Press the delay start button once to
activate it (h00 appears on the display)
and then press it again to set a 1 hour
delay (h01 appears on the display). The
pre-set delay increases by 1 hour each
time the button is pressed, until h24
appears on the display, at which point
pressing the button again will reset the
delay start to zero.
- Confirm by pressing the START/PAUSE
button. The delay countdown will begin
and when it has finished the programme
will start automatically.
l
It is possible to cancel the delay start by
turning the programme selector to OFF.
If there is any break in the power supply
while the machine is operating, a special
memory stores the selected programme
and, when the power is restored, it
continues where it left OFF.
The
following
selected before pressing the START/
PAUSE button.
OPTIONS button
This button allows you to choose between
three different options:
- PREWASHING
l
This option allows you to make a prewash
and it is particularly useful for heavily
soiled loads (can be used only on some
programmes as shown in the table of
programmes).
l
We recommend you use only 20% of the
recommended quantity shown on the
detergent pack.
- EXTRA RINSE
l
This option allows you to add one rinse at
the end of the washing cycle and is useful
for people with delicate and sensitive
skin, for which a small amount of
detergent residue can cause irritations or
allergies.
options
must
be
l
It is recommended to use this option for
children's clothes, heavily soiled items,
which may require more detergent to be
used, or towelling products that tend to
retain detergent.
- HYGIENE +
Activated
when
temperature.
This
cleaning of your clothes by maintaining the
same temperature for the whole wash.
If an option is selected that is not
compatible
programme then the option indicator
light first flashes and then goes off.
RAPID / STAIN LEVEL button
This button allows you to choose between
two different options, depending on the
selected programme.
- QUICK
The button becomes active when you
select the QUICK (14'-30'-44') programme
on the knob and allows you to select one
of three durations indicated.
- STAIN LEVEL button
l
Once the programme has been selected
the wash time set for that programme will
be automatically shown.
l
This option allows you to choose between
3 levels of wash intensity modifying the
length of the programme, depending on
how much the fabrics are soiled (can only
be used on some programmes as shown
in the table of programmes).
TEMPERATURE SELECTION
button
l
This button allows you to change the
temperature of the wash cycles.
l
It is not possible to raise the temperature
over the maximum allowed for the
programme, in order to protect the fabrics.
17
you
set
60°C
option
allows
with
the
selected
of
deep
Advertisement
