Page 3
Thank you for choosing this product. This User Manual contains important safety information and instructions on the operation and maintenance of your appliance. Please take the time to read this User Manual before using your appliance and keep this book for future reference. Icon Type Meaning...
1. SAFETY INSTRUCTIONS Operating voltage / frequency (V/Hz) (220-240) V~/50Hz Total current (A) Water pressure (Mpa) Maximum 1 Mpa / Minimum 0. 1Mpa Total power (W) 2200 Maximum washing capacity (dry laundry) (kg) • Do not install your machine on a carpet or such surfaces that would prevent the ventilation of its base.
Read this user manual carefully. Your machine is for domestic use only. Using it for commercial purposes will cause your warranty to be cancelled. This manual has been prepared for more than one model therefore your appliance may not have some of the features described within.
Page 7
This will not affect the operation of your Washing Machine. • The packaging of the machine could be hazardous to children. Do not allow children to play with the packaging or small parts from the Washing Machine. • Keep the packaging materials in a place where children cannot reach them, or dispose of them appropriately.
Page 8
injuries. RISK OF BURNS Do not touch the drain hose or any discharged water while your Washing Machine is running. The high temperatures involved pose a burn risk. RISK OF DEATH FROM ELECTRICAL CURRENT • Do not connect your Washing Machine to the mains electricity supply using an extension lead.
Page 9
corrosion. Never use paint removing materials in your machine. • Never use products that contain solvents in your machine. • Please ensure that garments loaded into your Washing Machine are free from foreign objects such as nails, needles, lighters and coins. Risk of fire and explosion Risk of falling and injury • Do not climb on your Washing Machine.
1.2 During Use • Keep pets away from your machine. • Please check the packaging of your machine before installation and the outer surface of the machine once the packaging has been removed. Do not operate the machine if it appears damaged or if the packaging has been opened.
depending on the product purchased. Replacement of drive belt, only by authorized service. Only original spare belt: 42006396 Optibelt 6 EPJ 1236 1.3 Packaging and Environment Removal of packaging materials Packaging materials protect your machine from any damage that might occur during transportation. The packaging materials are environmentally friendly as they are recyclable.
2. TECHNICAL SPECIFICATIONS 2.2 Technical Specifications Operating voltage / (220-240) frequency V~/50Hz (V/Hz) Total current Maximum: Water 1 Mpa pressure Minimum : (Mpa) 0. 1 Mpa Total power 2200 Maximum dry laundry capacity (kg) Spinning revolution 1400 (rev / min) Programme number 2.1 General Appearance...
3. INSTALLATION 3.2 Adjusting the Feet / Adjusting Adjustable Stays 3.1 Removing the Transit Bolts 1. Do not install your machine on a surface (such as carpet) that would prevent ventilation at the base. • To ensure silent and vibration-free operation of your machine, install it on a firm surface.
3.3 Electrical Connection 3.4 Water Inlet Hose Connection 3/4” 1. Your machine will have a single water NOTE: inlet connection (cold). The white Please ensure the plug is capped hose should be connected to accessible after installation/fitting. cold water inlet. • Should you need to replace the plug;...
3. Once you have made all of the 4.1 Detergent Drawer connections, carefully turn the water supply on and check for leaks. 4. Ensure that the new water inlet hoses are not trapped, kinked, twisted, folded or crushed. NOTE: Your Washing Machine must only be connected to your water supply using the supplied new fill hose.
4.2 Sections 4.3 Program Dial Main wash detergent compartment: This compartment is for liquid or powder detergents or limescale remover. The fluid detergent level plate will be supplied inside • To select the desired programme, turn your machine. (*) the programme dial either clockwise or anti-clockwise until the marker on the Fabric conditioner, starch, detergent programme dial points to the chosen...
The display panel shows “End” when the which occur due to foreign materials selected programme is complete. The damaging your machine are not covered by display panel also indicates if a fault has the warranty. occurred with your machine. 4. Close zips and fasten any hooks and eyes.
following criteria: NOTE: Take care not to exceed • If your clothes are only slightly soiled, the maximum load of the drum as this will do not pre-wash. Put a small amount give poor wash results and cause creasing. of detergent (as specified by the Refer to the washing programme tables for manufacturer) into compartment II of the information on load capacities.
machine. 1. Temperature Selection • Gently push the door until it clicks shut. 5.5 Selecting a Programme Temp. Use the programme tables to select the most appropriate programme for your laundry. 5.6 Half-Load Detection System Use the washing water temperature Your machine features a half-load detection adjustment button to alter the automatically system.
Page 20
4. Pre-Wash maximum spin speed and the cancel spinning option (--), press the Spin speed button until the desired speed is displayed. If you have skipped the spin speed you Auxiliary want to set, keep pressing the spin speed function adjustment button until the desired spin button 3 or 4 speed is displayed again.
dial while the child lock is active, the “CL” • Turn the water tap off. symbol will flash on the electronic display for 2 seconds. If the child lock function is active and a programme is running, when the programme dial is turned to the CANCEL position and another programme is selected the previously selected programme continues from where it was left.
7. CLEANING AND 7.2 Water Inlet Filters Water inlet filters prevent dirt and foreign MAINTENANCE materials from entering your machine. We recommend that these filters are cleaned when your machine is unable to receive 7.1 Warning sufficient water, although your water supply is on and the tap is open.
7.3 Pump Filter it and turning clockwise. 5. When closing the pump cover, ensure that the mountings inside the cover meet the holes on the front panel side. 6. Close the filter cover. WARNING: The water in the pump may be hot, wait until it has cooled down before carrying out any cleaning or maintenance.
8. FLUSH STOPPER / BODY / DRUM 1. Flush stopper Remove the detergent drawer and disassemble the flush stopper. Clean thoroughly to completely remove any softener residue. Refit the flush stopper after cleaning and check that it is seated properly. 2.
9. TROUBLESHOOTING Repair of your machine should be carried out by an authorised service company. If your machine requires repair or if you cannot solve an issue with the information provided below, then you should: • Unplug your machine from the mains power supply. • Turn off the water supply.
FAULT POSSIBLE CAUSE TROUBLESHOOTING Increase the amount of detergent following the Hard water. manufacturer’s instructions. Unsatisfactory washing result. Your laundry is too tightly packed Check that your laundry is spread out. Do not together in the drum. overload the machine. As soon as the machine is The end of water drain hose is too Check that the drain hose is at a suitable height.
11. DESCRIBING THE ENERGY Use programmes of shorter duration for lightly soiled laundry and daily washes. LABEL AND SAVING ENERGY Carry out cleaning and maintenance at regular intervals. 1. Brand 2. Model 3. Energy Class 4. Energy Consumption 5. Noise Value While Washing 6.
Page 29
PRODUCT FICHE Rated capacity (Cotton 60° full load) (kg) Energy efficiency class A+++ Energy consumption (kWh/annum)* Water consumption (L/annum)** 9680 Spin-drying efficiency class Noise (Washing) (dB(A)) Noise (Spinning) (dB(A)) Max spin speed (rpm)*** 1330 Remaining moisture content (%)*** Energy consumption (cotton 60° full load)(kWh/cycle) 0,66 Energy consumption (cotton 60°...
Page 30
Call the Depot number on your Proof of Purchase Document supplied with the product/kitchen. Call the LAMONA Service Line on 0344 460 0006 * Product installed within a domestic kitchen or a non-domestic kitchen where 8 or fewer people are using the appliance.
Need help?
Do you have a question about the FLM8700 and is the answer not in the manual?
Questions and answers