Advertisement
Instructions for mounting the
furniture door
Measure, mark and drill upper
l
hinge hole in frontal (387.5 mm
from Howdens
hole centre position).
It is possible to mount the hinges
and closure magnet on the right
or left-hand side depending on
your requirements. Mark the
screw hole positions, then drill
out these positions.
Fix the hinges in place with the
l
4 screws provided (A).
Mount the plate (D) on the right
l
or left-hand side, depending on
your installation requirements.
Place the plastic support (E)
under the plate and fix it in
position with screw (F).
Note: DX = Right
SX = Left
Fix the magnet (B) in place
l
using screw (C).
Stand the machine on a solid
board secured to the floor
(c.9-15mm thick)
©
lower pre-drilled
8
2
B
C
B
C
A
D
F
E
D
F
E
Advertisement
