Table of Contents
Advertisement
SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION
11.
Swing Motor and Worm Gear - See Note.
12.
Hydraulic Pump and Reservoir - Properly secured; no visible
damage or hydraulic leaks. Recommended hydraulic fluid
level on dipstick (system shut down, boom in stowed posi-
tion). Breather cap/dipstick secure and working.
13.
Turntable Bearing - No loose or missing hardware; no visible
damage; evidence of proper lubrication. No loose bolts or
looseness between bearing and structure.
14.
Battery Compartment Right Side - Batteries have proper
electrolyte level; cables tight; no visible damage or corro-
sion.
15.
Cowling and Latches - See Note.
16.
Battery Charger - See Note.
2-8
17.
Brake/Steer Valve - See Note.
18.
Boom/Upright - No visible damage; All pins properly
secured. Upright in vertical position. If Upright does not rest
on stop with machine in the stowed position, this indicates
upright is out of plumb.
19.
Counterweight - See Note.
20.
Tie Rod Ends and Steering Spindles - See Note. Tie rod end
stubs locked.
21.
Manual Descent Valve - See Note.
22.
Control Valve - See Note.
23.
Frame - See Note.
24.
Platform Pivot Pins - Properly secured.
25.
SkyGuard (If Equipped) - See Inspection Note.
3121713
Advertisement
Table of Contents
