Table of Contents
Advertisement
Available languages
Available languages
Lotus 75 TC LED Display Functions
Work:
When the machine is producing water, this icon will lit up.
Source:
When the machine has no inlet water or the inlet water is not
enough, this icon will lit up and the alarm will buzz.
Stand-by:When the machine is in standby mode, the icon is lit.
Work
• This icon will lit up only when the unit is producing water.
• When the unit is in standby mode, this icon will be off.
Source
When the machine has no inlet water or the inlet water is
not enough, this icon will lit up and the alarm will buzz.
• Unit can be in either stand-by mode or pump is working,
in any case when water source is cut, the function will be
activated.
• Either stand-by mode or working mode when the
function is activated, the icon will be lit and alarm will
buzz.
• Alarm will buzz 8 times, after the buzzing, alarm will be
shut and this icon will blink on the display.
• Alarm will buzz 8 times only once but every time when
the water cut, the alarm will buzz again.
ENG 18
Flush:
When the machine is flushing, the "Flushing" icon will light up.
1/2/3/5 Filter Life Status:
Numbers indicate the remaining life of four
different filters. Icons will change color in accordance with remaining filter
life.
Stand-by
• When the unit is in standby mode, this icon will be on.
• This icon will lit up off when the unit is producing water.
Flush
When the machine is flushing the RO membrane, this icon
will be lit up.
Flushing the RO Membrane:
• As water passes through the RO membrane, impurities
and bacteria are retained on the membrane surface, so you
should regularly flush the machine to ensure that the RO
membrane performance is optimized.
• Flushing method is Automatic flushing.
• The membrane will be automatically flushed for 15 seconds
each time the unit is turned on.
Advertisement
Table of Contents
