Transportation
Please take into consideration the following points while transporting the device.
• Stock up on top of each other more than 8 pieces.
• Before lifting the packages be sure that fixing tapes below the package
are intact.
Installation Methods
Our company recommends that your water purifier is installed by trained professionals as the installation process is somewhat complex and requires the
use of various tools. However, if you decide to install the purifier yourself, please refer to the following steps and diagrams:
Pre-Installation Preparations
• Choose the location where the water purifier will be installed
• Confirm the availability of the various tools required
for installation
• Confirm that you have all the connectors required for installation
• Make sure to turn off the water supply and electricity before
commencing installation
Adjustable Spanner
Drill
6.2 mm Drilling Bit
Hole Saw φ14 mm
Phillips and Flathead Screwdrivers
Scissors
14 - 16 mm Wrench
19 - 21 mm Wrench
Needle Nose Pliers
1
1
1 (Waste water hole)
1 (High-speed steel or marble hole saw)
1 of each
1 pair
1
1
1
• Lift the packages holding from bottom.
• Persons, who are vulnarable to heavy lifting shoud not carry the packages
to prevent any health issues.
ENG 13