Trailer Ball & Couplers; Before Towing; Variable Height Bracket; Bolting Instructions - Kärcher TRAILER 3500E HDS 4.7/35 Operator's Manual

poids total de la remorque chargée excède la
capacité de l'attelage et/ou du véhicule
remorqueur.
It is very important that you know and understand the
towing capabilities of your tow vehicle. This is espe-
cially true with the braking abilities of the tow vehicle.
You should check with your authorized dealer to see
what the capabilities are for the total towing load and
the maximum allowable tongue weight for the vehicle
you plan on using for towing.
It is also important that the lighting system in the tow
vehicle has sufficient capacity support the additional
load the trailer lighting will add to the system. A heavy
duty flasher may be required to make your turn signals
function properly.
Trailer Ball & Couplers
WARNING: Failure to properly engage the hitch ball
in the coupler ball socket and securely lock the
coupler latch mechanism can cause the trailer to
become detached from the tow vehicle while trav-
eling, which may cause serious injury or property
damage.
AVERTISSEMENT: Le non-respect d'engager
correctement la boule d'attache dans la cavité de la
boule de l'attelage et de verrouiller solidement le
mécanisme du loquet de l'attelage pourrait mener
la remorque à se détacher du véhicule remorqueur
pendant le déplacement, ce qui pourrait causer des
blessures graves ou des dommages à la propriété
Ball diameter for which rating (GVWR) shall not exceed
the gross trailer weight marked on the trailer coupler.
The hitch balls have the rated load they are capable of
towing stamped Into the top of the ball.
Make sure the ball that you use to tow your trailer has
the same capacity rating as the coupler.
Do not use a different size ball than the size the coupler
is designed to use.
Class Coupler
3,500# GVWR
II
III 5,000# GVWR
IV 8,000# GVWR
Karcher Trailer 3500E HDS 4.7/35 Operator's Manual 9.808-363.0 - B

Before Towing

Check mounting bracket hardware for wear and proper
tightness. Replace bent, broken, or worn hardware.
Tighten hardware to 75-94 ft. lbs. Use only the
hardware provided with the Trailer. If replacement
hardware is needed, order replacement
kit 8.924-356.0.
Make sure that the trailer safety chains are properly
connected to the towing vehicle and trailer according to
SAE J684. See Safety Chain information in your
manual.
Make sure that all trailer lighting is hooked up and
working properly.
Warning: Failure to follow all installation
instructions could result in coupler failure
AVERTISSEMENT: Le non-respect de toutes les
directives d'installation pourrait entraîner une
panne du coupleur.

Variable Height Bracket:

Coupler operation must not be impaired in any way. Do
not use if coupler operation is impaired.

Bolting Instructions:

Align holes in coupler and mounting bracket.
Insert two (2) 5/8"x4.5", grade 5 bolts through desired
mounting bracket holes and coupler. For each bolt,
Place one (1) washer at the bolt head side and another
at the bolt thread side before assembling the nuts.
Tighten lock nuts to 90-96 ft. lbs. After installation,
ensure coupler operation is not impaired in any way. Do
not use if coupler operation is impaired. The hardware
provided with the trailer has a self-lubricating coating
which is taken into account for the tightening torque
above, and is lower than standard hardware and also is
more consistent with re-torque specifications to first-
torque than standard hardware. Order replacements
with the 8.924-356.0 replacement kit, or consult your
hardware vendor for applicable, higher, torques for the
application.
Ball Diameter
2"
2"
2 5/16"
NOTE: Coupler must be secured to mounting bracket
using two sets of holes in the mounting bracket.
Safety
7