Speco CVC-647TP Instructions

Vandal resistant dome camera

Download this manual

Enlarged version

CVC-647TP

Vandal Resistant Dome

Camera Instructions

CONTENTS

1. DESCRIPTION......... ........ 1

2. INSTALLATION............ .... 2

1. DESCRIPTION

Thank you very much for purchasing our product.

This Tamper Resistant Color Dome Camera uses a SONY Super-HAD

CCD Image Sensor and solid-state circuitry, which provides long life and

high reliability. This CVC-647TP offers excellent image quality with low

lag and high burn resistance, and is not subject to distortions from

magnetic fields. Highly resistant to shock and vibration, and easy to install,

this Camera is a very good choice for your CCTV system.

Page

3.WIRING INSTRUCTIONS ... 3

4. SPECIFICATIONS.............. 4

P.1

Page

Need help?

Do you have a question about the CVC-647TP and is the answer not in the manual?

Page 1 This Tamper Resistant Color Dome Camera uses a SONY Super-HAD CCD Image Sensor and solid-state circuitry, which provides long life and high reliability. This CVC-647TP offers excellent image quality with low lag and high burn resistance, and is not subject to distortions from magnetic fields.
Page 2 2. INSTALLATION STEP 1: Please select the most suitable position on the ceiling to install the camera. STEP 2: Remove the locking screw and rotate the dome housing counterclockwise to remove it from the mounting base (as shown by the figure below).
Page 3 75-Ohm coaxial cable with 95% copper shielding. STEP 2: Plug the Power Adapter into an AC socket and the DC plug into the DC Jack of the camera. Please note that the center pin is positive (+). TO DC POW ER SOURCE...
Page 4 Note: Design and specifications are subject to change without prior notice. Speco Technologies 200 New Highway Amityville, NY 11701 Tel: 631-957-8700 Fax: 631-957-9142 www.specotech.com 2003/11/03 040024B by SPECO Technology NTSC: 510x492 380 TV lines 0.5 LUX @ F2.0 More than 50 dB 0.45 120 mA...